This motor has  aluminium alloy body capable of providing a high torque . It ideal for heavy duty applications. The robust construction and a reduction gearbox, all metal made, make it very resistant to vibration and stress transmitted to the shaft.  It can be usage for  boat, car, electric bicycle, fan.

This  DC gear motor has  aluminium alloy body capable of providing a high torque .The robust construction and a reduction gearbox, all metal made, make it very resistant to vibration and stress transmitted to the shaft.  It can be usage for  Vehicles & Remote control toys. The motor surface has be oxidized but  their is no affect in operation.

This is a standard dual shaft plastic gear Bo motor running at 100 RPM or 150 RPM. Between the two shaft one can be connected to wheel and the next can be connected to an  encoder.iT has light weight and low density with uniformity of parts.It has capability to absorb shock and vibration and has low coefficient of friction . It can be used for DIY robots, light weight DIY projects running on 5V-9V.

Features:

• High resolution.
• Accurate positioning
• Fast control response.
• Constant torque throughout the servo travel range.
• Excellent holding power.
• Weight: 9gm.
• Dimension 23*12.2*29mm.
• Stall torque 1.8kg/cm (4.8V)
• Operating speed: 0.1sec/60degree (4.8v).
• Operating voltage: 4.8V.

Wire Description:

• RED – Vcc (Positive)
• Brown – GND (Negative)
• Orange – PWM (Signal)

The MG90s servo is a gear that is perfect for high-end application. It can rotate approximately 180 degrees.It comes with with 3 arms and screws and with pre-soldered female wires with over torque protection for durability . The  PWM (Signal) is Orange , VCC (Power) is Red , GND (Ground) is Brown . It can be used for making spider robot, biped robot etc

Futaba S3003 standard size Servo for general applications. Like DIY robots ,car etc. The power  is supplied through external adapter. It is stable and shock proof. It is compliant with most standard receiver connector.

MG996R is  an upgraded version of MG995 servo.  It has  upgraded PCB and IC controll system which makes the motor  more accurate and has double bearing balls. It has 30 cm wire with 3 pin female header. As well as the internal gearing and motor are also upgraded. It can be used for DIY projects .

40kg S8218 digital servo motor is a High Torque Servo Motor that is Compatible with Futaba, JR, Sanwa, Hitee series. The servo should be kept clean and free of dust, corrosive gas and humid air and also from Torque over charged as these may damage the servo. It has metal gear inside with voltage of 6-7.4 v. It is Compatible with Futaba, JR, Sanwa, Hitee series.

This motor has  aluminium alloy body . The robust construction and a reduction gearbox, all metal made, make it very resistant to vibration and stress transmitted to the shaft.  IT can be usage for  Vehicles & Remote Control Toys 

The 12 V, 50 RPM Motor Small Metal Gear is DC 12V motor having 37mm outer diameter and 50 Revolutions per minute (RPM) characteristics. It can be great choice for projects that require high torque and low speed. It can be suitable for various electrical products like: - Boat, Car, Electric Bicycle, Fan, Home Appliance etc and as well as reversible for BBQ robot parts.

The 12 V, 100 RPM Motor Small is a DC 12V motor having 37mm outer diameter and 100 Revolutions per minute (RPM) characteristics. It has various features like voltage adjustable rotation speed, large torque, low noise, wide working voltage range, small current and many more. It can be suitable for those applications that require high torque and speed. It is widely used in various sectors.

The 12 V, 200 RPM Motor Small Metal Gear is DC 12V motor having 25mm outer diameter and 200 Revolutions per minute (RPM) characteristics. It can be great choice for projects that require high torque and speed. It can be suitable and easily used in sumo robot, Line follower robot or light follower robot projects and many more.