The 1.3 inch OLED (Organic Light –Emitting Diode) LCD display module use SH1106 Driver module. It is a self-light emitting technology with multi layered organic film placed between an anode and cathode. It has high application potential for virtually all types of displays with ultra-low power consumption feature.

The 0.9 inch OLED display use SSD1306 driver chip with 128x64 dot matrix display module. OLED screens has high brightness, self-emission, high contrast ratio, wide temperature range, wide viewing angle, and low power consumption. This OLED can be used for smart watch, MP3, DIY projects and many more.

Specifications

• Resolution: 128 x 64
• Visual Angle: >160°
• Input Voltage: 3.3V ~ 6V
• Compatible I/O Level: 3.3V, 5V
• Mini Size: 2.7 x 2.8cm
• Only Need 2 I/O Port Control
• Full Compatible with Arduino
• Working temperature: -30°C ~ 70°C
• Module volume: 32 x 35.5 x 4mm

16 * 2 Lcd module is 16 characters wide and 2 row character Lcd module made of high quality   material. It has 16 pin connecter with blue black light. It can be easily controlled by MCU and can be used in any embedded systems, industrial device and hand held equipment’s.

20* 4 LCD module is 20 characters wide and row character LCD module made of high quality   material. It can be controlled with 6 digitals line. It has built in characters set of English / Japanese. It has 16 pins connector. It can be used in different projects. It has connection port of 0.1" pitch.

 The I2c Connector Module Board use PCF8574 I2C chip that helps to converts I2C serial data to parallel data for the LCD display. It is compatible with 16x2 or 20x4 Character Display Module that supports 4 bit mode. It can have 8 modules on a singles i2c bus as well as the backlight can be controlled by the jumper and display contrast is adjustable by the potentiometer on the board.

The 5 Inch HDMI Display is high resolution plug and play LCD mostly used in Raspberry Pi. Instead of I/Os the HDMI interface is used for displaying. The drivers are provided and backlight can be turned off to lower power consumption.  It also has USB interface for touch control.

2.0-inch ILI9225 TFT LCD Display Module with 220*176 resolution, 65K colors, 3.3V-5V operating voltage, and 4-wire SPI interface. Includes SD card slot for added storage, supports Arduino, STM32, and C51 with sample programs, and built to military-grade standards for reliable performance.It can also has integrated SD card expansion circuit. It can be used in many DIY arduino projects.

 The Graphic Lcd is 12864zw LCD module. It has 6800 8 bit parallel interface. It has 180 by 64 dots display format with viewing area of 72.0 x 40.0 mm. It can be used in different DIY projects, display units in video games and many more.

Serial LCD with I2C Backpack comes with 16 by 2 Lcd module and I2C connector. With the help of lcd backpack the desired data can be displayed on the lcd through the I2C bus. The backlight can be controlled by the jumper and display contrast is adjustable by the potentiometer on the board.

The LCD Key shield used 16 by 2 LCD display.  It is developed for arduino compatible boards. There are 5 keys and 1 reset button. The keys are used for up, down right, left and select. The backlight is adjusted with integrated the potentiometer. It use 4 bit Arduino lcd library. It can be used as display unit.

The Nokia LCD is a Basic Graphic LCD Screen Module for applications. It has various features like: - Built-in backlight, Easy communication with common MCU control, Uses Philips PCD8544 LCD controller with SPI interface, Graphic LCD module with 84 x 48 pixel resolution (i.e. 48 rows and 84 columns), Compatible to Nokia 5110, 3310 LCD and many more. It also can be great choice for DIY projects as well.

The JJPRO F02 VR brings a huge difference while using the quadcopter. It is very user friendly and is made of quality material. The transfer of image is very stable and antenna provides high performance. It offers USB charging and has a built-in rechargeable battery. Due to its design it is very comfortable for long term use as well.