Samsung 2500mah li-ion battery (INR18650-25S)  is an electronic device. It has a 3.6 nominal voltage. This device has a nominal capacity of 2500 mAh.It's a flat top in style.It packs in a very high energy density which gives it an industry best Capacity to Weight Ratio (in high discharge cells). They can be used in all high discharge applications requiring higher than 10 amp continuous discharge.

**Please do not select air shipping for battery as the same is not permitted by airline regulations.

The Wireless Charging Module is an inductive wireless charging module suitable for any electronic projects for close wireless charging or power supply. It comes with two coils, a transmitter coil and a receiver coil. The trasmitter coil needs to be connected to a 12V DC power supply. The receiver coil would provide 5V DC @ 2000mA when transmitter is held close to it. Its small size and insulation coil is more suitable for using in wireless projects.

15v,6amp adaptor for Imax b6 charge is an electronic device that is magnet best. This device is compatible with a balance charger. It is highly efficient, and the quality of this product is also very high. This electronic product has a long life span. It is easy to install.

It has a great performance.This BMS has battery Protection Board adopts intelligent lithium cell management IC for fast and safe charging.It has Over-Discharge Voltage Range too and also it has  2.3~3.0V±0.05V and over-Discharge Voltage Range is 2.3~3.0V±0.05V.It has High quality Lithium battery protection board has gone through load and aging test for quality assurance.It has wide range of applicable temperature ,suitable for many places.

Electronic system working as a protection of batteries against excessive discharge. This module will also provide a charger function for these batteries. It allows you to build a safe battery pack that does not need to be charged with special chargers for li-ion batteries. The 2 in 1 module was created to keep the cells in the best condition, preventing them from overcharging and over-discharging. One module replaces the charger and the security module.

It is a little electronic device which is a battery-health charging control unit designed to keep batteries or Cell Packs ranging between 6V and 60V DC fully charged, electrically healthy, and of course ready to deliver the power that users want to rely on in the time of need. It has different features like it has to charge time recording function, automatic parameter detection, battery connection detection, and many more. The balancing board must need BMS to use together, and the BMS is without a balancing function.

It allows the simultaneous charging of 6 lithium batteries type 18650 or similar (electrically speaking). It is easy to implement and also used to manage the charge and discharge of battery systems that may be part of the electronic projects. It is basically a protection system for overcharging over-discharge and short-circuit.

5S 4.2v li-ion Balancer Board(BMS HX-JH-008) is used in lithium Polymer Li-ion Li-Po lipo battey cell Charge four batteries at once Charge from 2S to 5S Lithium batteries Balances each individual cell of each battery has convenient T-Style battery connector Replaceable DC input fuse Replaceable battery port fuses Suitable for 2, 3 or 4 string 18650 batteries or polymer lithium battery series combination Battery internal resistance differences within 5 milliohm, voltage within 0.03 V voltage, capacity vary within 50 ma Cut-off Voltage is according to the BMS setting Daisy chain multiple boards for additional charging.Contains 4mm gold bullet input connectors. Self-resetting polyfuses protect balance circuits.

In this electronic component basically, after connecting the line user should need to charge first and then have to give output. If the capacity of the battery's internal resistance is closer it will be better. When the battery is connected in series with 3 groups, Please ensure that the voltage of each battery is the same. If not the same, please fill in each set of batteries and then use.

BMS (Battery Management System) is a battery management system that is designed to monitor the status of batteries, manage the process of charging / discharging batteries, etc.
 

For a non-balanced rechargeable lithium battery pack, the charge balance makes the battery pack in the battery pack at the same time fully charged.

This type of BMS comes with  recovery function-AUTO Recovery).It has Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, a polymer lithium battery).Weight of this BMS is 9.3g (standard / enhanced version), 10.3g (balanced version).Charging voltage of this board is 16.8V – 18.1V.Continuous discharge current (upper limit) is  40A (if the cooling environment is not good, please reduce the load current use).Continuous charge current (upper limit): 20A.It is  suitable for starting current below 80A, power 135W below the drill.