The 5V Stepper Motor 28BYJ-48 With Stepper Motor Driver Board based on ULN2003 driver board. It is high quality stepper motor. It is suitable for large range of applications requiring precise motion control. It can be applicable in normal printers, 3D printers, CNS, robotic arms and many more.

The 12V Stepper Motor 28BYJ-48 With Stepper Motor Driver Board based on ULN2003 driver board. It is stable and high qualitative stepper motor. It is mainly used in Air Conditioner Louver, Small Cooling/Heating Fan and so on. Its technique parameters are qualified for national electronic standard i.e.  SJ/T10689-95.

Small Stepper motor (High torque) for applications like Micromouse.

Features:

• Tapped Holes on 4 corners.
• 12V 0.3Amp in bipolar mode.
• Weight : 220 gm
• Dimensions :42 x 42 x 34 mm
• 5 mm Standard Shaft 24 mm length
• Torque 3.1kgcm
• Ideal for micromouse due to its low weight to torque ratio.

Usage:

• Connect +ve to 2 Common wire and drive 4 coils with drivers such as ULN2003/ULN2803 for driving in Unipolar mode. This ic's will not work directly with this motor since current capacity is less. However 2 in parallel can drive this motors.
• Connect H-bridge / Chopper Drive to 4 wires to use in Bipolar mode.

Wiring Details:

• A+ = Blue
• A- = Yellow
• B+ = Red
• B- = Green

Package Includes:

• 1 x NEMA17 HIGH TORQUE STEPPER MOTOR SMALL

The A4988 Stepper Motor Driver Carrier is a breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver that has the features of adjustable current limiting, over current and over temperature protection. It operates from 8 V to 35 V. It can be applicable for various DIY projects.

The DRV8825 Stepper Motor Controller IC is a driver module which is built in microstepping indexer. It can be applicable in Various applications like :- Automatic teller machines, Money handling machines, Video Security Cameras, Printers, Scanners, Office automation machines, Gaming machines, Factory automation, Robotics and many more.

The Stepper Bracket is a 42 mm L Shape Steel Alloy Mounting Bracket for NEMA 17 Stepper Motor Module. It is durable with alloy steel material. It is fit for 42 mm stepper motor as NEMA17. It is also very easy to install.

NEMA 17  Stepper Motor BIG is for 3D printer applications and CNC applications and other various applications too. This device demands low speed with high precision. It is used in many machines such as 3D Printers, CNC Router and Mills, Camera Platforms, XYZ Plotters, etc. Nema17 4 wire Bipolar Stepper Motor is High precision 4–wire bipolar stepper motor, size in Nema 17, 1.8 deg. step angle (200 … It is one of most parameters for the stepper motor. Users can use the A4988 or drv8825 driver to run this motor.

The latest 3rd generation TB6565 Stepper Driver has been upgraded to the intelligent, professional and industrial-level drive set by re-designing the PCB board, embedding intelligent memory chip(professional version) and upgrading the external manual control tools (display panel and control pad).

It has a high-quality shiny surface appearance and robust construction, longer working life. The rounded teeth of this tooth and belt are engaged together longer providing a smoother transition between teeth, good performance for 3D printers. It is applicable in the 3D printers, CNC, and other robotics with timing belt pulley, GT2 timing belt pulley system especially suited for linear movement and positioning, and it’s good for GT2 6mm Width Belt.

1. The ULN2003 Stepper Motor Driver Module is a Driver Module for stepper motor which is based on ULN2003 controller IC. It has A, B, C, and D four-phase LED that indicates the status of the stepper motor work. It can be suitable for using in high-power stepper motors for various DIY projects

• The 8MM micro stepper motor with fine workmanship.
• It should be widely used in small household appliance digital products such as digital cameras.
• Package Contains: 1 Pair Stepper Motor
• Type: Permanent Magnet
• Certification: Ccc

The NEMA 23 23HD56001Y-21B is a 4-wire bipolar stepper motor with a 1.8° step angle, providing 1.26Nm (12.8 kg.cm) of torque. It operates at 2.8A per phase and has a nominal voltage of 3.36V. This motor is ideal for medium CNC applications and precision control in 3D printers and robotics. It features a NEMA 23 standard profile for easy interchangeability and requires a compatible driver like the THB6064AH or DM542T for control. Its compact size and high torque make it suitable for demanding applications requiring accuracy.