The 3.5-inch TFT LCD display is a high-resolution, full-color screen designed for Arduino and microcontroller projects that require graphical output. Unlike touch-enabled versions, this module focuses solely on display functionality, making it ideal for applications that do not require user input via touch.

Key Features:

 Screen Size: 3.5 inches
 Resolution: 480 × 320 pixels
 Interface: Parallel (8-bit)
 Driver IC: ILI9486
 Operating Voltage: 3.3V or 5V (varies by module)
 Compatibility: Works with Arduino Uno
 Backlight: Integrated LED backlight for clear visibility
 PCB Design: Compact module with pre-soldered pin headers for easy connectivity

The ESP32-S3-WROOM-1-N16R8 is a Wi-Fi + Bluetooth 5 (LE) module powered by Espressif’s ESP32-S3 SoC (System on Chip). It features 16MB of Flash memory and 8MB of PSRAM, making it a high-performance module for IoT, AI, and edge computing applications.

Key Features

• ESP32-S3 SoC: Based on a dual-core Xtensa LX7 processor, optimized for AI and IoT applications.
• Wi-Fi & Bluetooth 5 (LE): Supports 2.4 GHz Wi-Fi 802.11 b/g/n and Bluetooth 5 Low Energy (LE) with long-range support.
• Memory:
  • 16MB Flash (for firmware and application storage)
  • 8MB PSRAM (for AI and ML applications, buffering, and complex operations)
• USB Support: Built-in USB OTG (On-The-Go) interface for direct USB connectivity.
• AI Acceleration: Supports vector instructions for AI and ML applications.
• Security:
  • Secure boot
  • Flash encryption
  • AES, RSA, SHA cryptographic hardware acceleration
• Low Power Consumption: Optimized for battery-powered applications.
• Rich GPIOs: Multiple GPIOs for PWM, ADC, SPI, UART, I2C, I2S, DAC, and other peripherals.
• Operating Voltage: 3.3V
• Operating Temperature: -40°C to 85°C

The breadboard assistant includes 14 high-quality jumpers of different lengths, 10 of each, with different colors, which means that a kit includes 140 high-quality jumpers of different lengths.
Transparent high-quality storage box, easy to access, will not be lost.
140 long and short high-quality jumpers, red, orange, yellow, green, blue, purple, gray, brown, white..

Box size: 165×55×10mm

Lengths available: 2, 5, 7, 10, 12, 15, 17, 20, 22, 25, 50, 75, 100, 125 (mm) --140pcs total

The ESP32-C3 Dual USB development board is a compact and versatile module based on the ESP32-C3 microcontroller, which features a RISC-V 32-bit single-core processor with a clock speed of up to 160 MHz. This board is equipped with two USB Type-C ports, enhancing flexibility in power supply, programming, and connectivity options.

Features:

• 2.4 GHz Wi-Fi: IEEE 802.11 b/g/n-compliant
• Bluetooth and Bluetooth LE: Bluetooth 5, Bluetooth mesh
• 4 MByte(32Mbit) SPI Flash
• 384 KByte ROM
• 400 KByte SRAM
• PCB Antenna
• Dual Type-C USB connectors
• Reset and User/Firmware buttons
• RGB WS2812 User LED
• Power LED

The ESP32 DEVKIT V1 (38-Pin, Type-C, CP2102) is a powerful development board built around the ESP-WROOM-32 module. It features an ESP32 dual-core Tensilica LX6 processor with Wi-Fi and Bluetooth capabilities, making it ideal for IoT, automation, and embedded applications.

This version of the board comes with a USB Type-C connector for power and programming, replacing the traditional Micro-USB port. It also includes the CP2102 USB-to-UART bridge, ensuring reliable communication with computers for flashing firmware and serial debugging.

With 38 GPIO pins, support for ADC, DAC, PWM, capacitive touch sensors, and multiple communication interfaces, this board is well-suited for a wide range of projects, from home automation to robotics and industrial control systems.

he ESP32-C3 Zero Mini Development Board is a compact and powerful microcontroller board designed for IoT applications, smart home devices, and embedded systems. It features the ESP32-C3 chipset, which includes a 32-bit RISC-V single-core processor running at up to 160MHz, making it energy-efficient yet capable of handling various wireless and sensor-based tasks.

Features

• Low-power SoC equipped with RISC-V 32-bit single-core processor, up to 160MHz main frequency
• Supports 2.4GHz Wi-Fi (802.11 b/g/n) and Bluetooth® 5 (LE)
• 400KB of SRAM, 384KB ROM, and 4MB of onboard Flash memory
• Castellated module and onboard ceramic antenna, allows soldering directly to carrier boards
• Supports flexible clock, module power supply independent setting, and other controls to realize low power consumption in different scenarios
• Integrated with a USB serial port full-speed controller, 15 x GPIO pins allows flexible configuring pin functions
• 3 x SPI, 1 x I2C, 2 x UART, 1 x I2S, 2 x ADC, etc.

An Arduino Cable (100cm) is typically a USB A to USB B cable, designed for connecting an Arduino UNO/MEGA board to a computer for programming and power supply. It is commonly used for communication between the Arduino and a PC or laptop.

Key Features

• Length: 100 cm (1 meter), providing sufficient length for ease of connection and flexibility.
• Connector Type:
  • USB A (Standard USB): One end that connects to the computer (PC, laptop, or other USB-enabled devices).
  • USB B (Type B): The other end that connects to the Arduino UNO board.
• Data Transfer and Power: The cable is used to transfer data for uploading sketches to the Arduino and to supply power to the board.
• Compatibility: Fully compatible with the Arduino UNO and other Arduino boards that use a USB B port (like Arduino Mega 2560).
• Durable: High-quality construction to ensure reliability and long-term usage.
• Plug-and-play: No drivers are typically needed for most systems as they are automatically detected by the computer when the board is connected.

The ATtiny85 USB Development Board is a compact, low-power microcontroller platform designed for embedded applications, hobbyist projects, and DIY electronics. Based on the Atmel ATtiny85 8-bit AVR microcontroller, this board is widely used for small-scale automation, sensor interfacing, and USB-based projects.

Key Features

• Microcontroller: ATtiny85 (8-bit AVR architecture)
• Operating Voltage: 5V
• Power Supply: USB (5V)
• I/O Pins: 6 digital I/O pins (including PWM and ADC functionality)
• Memory:
  • 8KB Flash (2KB used by bootloader)
  • 512B SRAM
  • 512B EEPROM
• Clock Speed: Up to 16.5MHz (internal PLL)
• Communication: I²C, SPI, USB

Compatible With Arduino UNO R3

The Dual PS2 Game Joystick Button Module is a controller interface designed to simulate joystick inputs, typically used in robotics, gaming projects, or custom controllers. This module is compatible with Arduino boards like the Arduino Uno R3 and provides easy-to-use analog and digital inputs, making it ideal for joystick-based control systems.This Dual PS2 Joystick Module has two joysticks, each with a X and Y analog axis, along with push buttons that act as digital inputs. The module is widely used in Arduino-based projects, especially for controlling robots, video games, or other applications where two-axis control is needed.

Specifications:
This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You can easy connect it to your Ramps board using the "smart adapter" included.After connecting this panel to your Ramps you don't need your pc any more, the Smart Controller supplies power for your SD card. Further more all actions like calibration, axes movements can be done by just using the rotary encoder on the Smart Controller. Print your 3D designs without PC, just with a g-code design stored on the SD card.

-Using a large screen 12864LCD(3.2’’), it can support 8 GB
-With a SD Card base on back, put slicing file into the SD Card and select the file on the LCD, then can be printing
-Adapter for RAMPS 1.4 RepRap Electronics is included
-Plug and play on the RAMPS, but need to modify the firmware to support
-Proudct comes encoder parameter adjustment can be achieved, and the file selection print
Package Size:6.5 x 4.6 x 2.8 inches
Package Weight:7.2 ounces

Package Included:
1 * 12864 LCD Control Panel (SD card not included)
1 * Connector
2 *30cm FC Cable

• Barrel Input Connector for DC Voltage Input for AC/DC Adapters (6-24VDC)
• All NodeMCU Lolin V3 pinouts are brought on headers
• Multiple Header pins for ease of connectivity with other external devices
• On-Board Switch-mode 5V regulator
• Power Supply Headers for :
  • VIN
  • +5V
  • 3.3V
  • USB VCC / VUSB
• Antenna Mark for Correct orientation of the NodeMCU module insertion
• Onboard LED indicator

Technical Specifications:

• Input Voltage: 6V – 24V DC
• PCB Thickness: 1.6mm
• NodeMCU Pin Distance between sides: ~28.0mm
• Pin Pitch: 2.54mm (0.1in)
• Board Dimensions: 60.0mm x 60.0mm x 15.0mm (L x W x H)
• Weight: 22.5 g

Overview

• Development Board
• Micro USB
• WiFi
• Bluetooth
• Arduino Compatible

Features

• Micro USB connection
• 1 analog input(3.2V max input)
• Compatible with Arduino
• D1 R32=WiFi+bluetooth+UNO
• 4MB Flash

Specifications

• Operating voltage: DC 5V - 12V
• Length: 53.3mm
• Width: 68.3mm
• Weight: 15 g

Application

• IOT Application
• Wireless Application

Package Included

• 1 x Arduino Wifi & Bluetooth R32 Based Esp32