The Motor CCW (XYT-2312) is a 2312A Motor Module for Phantom 3 Standard with counterclockwise threading (CCW) is for propellers that use the same rotational direction. It has various features like: - Tested for safety, Durability, Uses highest quality components etc. It can be applicable for professional and recreational use. It is also suitable for using in various quadcopter modules, Drones and so on.

Small Stepper motor (High torque) for applications like Micromouse.

Features:

• Tapped Holes on 4 corners.
• 12V 0.3Amp in bipolar mode.
• Weight : 220 gm
• Dimensions :42 x 42 x 34 mm
• 5 mm Standard Shaft 24 mm length
• Torque 3.1kgcm
• Ideal for micromouse due to its low weight to torque ratio.

Usage:

• Connect +ve to 2 Common wire and drive 4 coils with drivers such as ULN2003/ULN2803 for driving in Unipolar mode. This ic's will not work directly with this motor since current capacity is less. However 2 in parallel can drive this motors.
• Connect H-bridge / Chopper Drive to 4 wires to use in Bipolar mode.

Wiring Details:

• A+ = Blue
• A- = Yellow
• B+ = Red
• B- = Green

Package Includes:

• 1 x NEMA17 HIGH TORQUE STEPPER MOTOR SMALL

Stroke : 250mm

Installation Distance : 355mm

No-load speed : 30mm/s

Maximum load : 500N

Rated Voltage : DC12V

Frequency of use : 10%
Power Consumption Rate : 60W

Stroke : 150mm

Installation Distance ; 255mm

 No-load Speed : 15 mm/s

Maximum Load : 900N

Rated Voltage : 12V

Frequency of use; 10%

Power : 60W

The NEMA 23 23HD56001Y-21B is a 4-wire bipolar stepper motor with a 1.8° step angle, providing 1.26Nm (12.8 kg.cm) of torque. It operates at 2.8A per phase and has a nominal voltage of 3.36V. This motor is ideal for medium CNC applications and precision control in 3D printers and robotics. It features a NEMA 23 standard profile for easy interchangeability and requires a compatible driver like the THB6064AH or DM542T for control. Its compact size and high torque make it suitable for demanding applications requiring accuracy.

Inner Diameter: 6mm to 6mm

Brass rigid shaft coupler is a durable, corrosion-resistant mechanical component used to connect two shafts for torque and rotation transmission. Made from high-quality brass, it ensures precise alignment and a secure, non-flexible connection, ideal for applications like robotics, CNC machines, and 3D printers.

It features set screws for easy installation but is unsuitable for shafts with misalignment.