The 2 Pin Connector is mostly found on smaller LiPoly cells. It is straight male connector used in different projects.

EMAX BLHELI ONESHOT 12AMP ESC based on BL Heli firmware used in multicopters for speed control. It has features like low voltage cut off protection, over heat protection, throttle signal loss protection. It also helps in programming of rotation direction of motor. The alarm helps to find the device. This device is compatible with all the receivers and also the throttle range can be configured.

The 40 Pin ZIF Dip IC test board socket are commonly used on programming units and IC testers, transistors. It is easy to remove and to program ICs with great pin contact with a lever. It is also known as IC sockets.

The 28 Pin ZIF Dip IC test board socket are commonly used on programming units and IC testers, transistors. It is easy to remove and to program ICs with great pin contact with a lever. It is also known as IC sockets.

The DB9 female connector is Right Angle connector that is used for PCB mounting. It is used to connect standard serial cables. It has footprint of 0.318".

The 6  Pin IC base is commonly used removable holder that helps to soldered directly to the PCB while the IC can be interchangeable. It is used for those IC which is temperature sensitive and cannot be soldered to the board. It can be used for multiple DIY projects and other application requiring replaceable ICs.

The 8  Pin IC base is commonly used removable holder that helps to soldered directly to the PCB while the IC can be interchangeable. It is used for those IC which is temperature sensitive and cannot be soldered to the board. It can be used for multiple DIY projects and other application requiring replaceable ICs.

The 16  Pin IC base is commonly used removable holder that helps to soldered directly to the PCB while the IC can be interchangeable. It is used for those IC which is temperature sensitive and cannot be soldered to the board. It can be used for multiple DIY projects and other application requiring replaceable ICs.

The 20  Pin IC base is commonly used removable holder that helps to soldered directly to the PCB while the IC can be interchangeable. It is used for those IC which is temperature sensitive and cannot be soldered to the board. It can be used for multiple DIY projects and other application requiring replaceable ICs.

The 24  Pin IC base is commonly used removable holder that helps to soldered directly to the PCB while the IC can be interchangeable. It is used for those IC which is temperature sensitive and cannot be soldered to the board. It can be used for multiple DIY projects and other application requiring replaceable ICs.

The 40 Pin IC base is commonly used removable holder that helps to soldered directly to the PCB while the IC can be interchangeable. It is used for those IC which is temperature sensitive and cannot be soldered to the board. It can be used for multiple DIY projects and other application requiring replaceable ICs.

The XT60 male connector is a connector that ensures a solid high-amp connection.It is a perfect application for lithium polymer battery.