× Success! Product successfully added to cart.
  • NRF 905 Module
    Out of Stock
    -1%

    NRF 905 Module

    The NRF905 wireless module use high performance Nordic VLSI NRF905 radio chip. It Work on the 433MHz band frequency with 50kbps transmission data range. It can be used for various application lije wireless meter reading, low power handheld equipment’s and many more. It contains  a NRF905 Module and antenna in its package.

  • NRF 24l01 With Antenna
    -29%

    NRF 24l01 With Antenna

     The Nrf24l01 wireless transceiver module with antenna is easy and suitable module to setup wireless communication system. This module allows communication up to 1000 meters without barriers. It has active RFID and NFC with support of six channels of data reception.

  • Wireless Remote With Circuit Board
    -24%

    Wireless Remote With Circuit Board

    4-Way Wireless Remote Control with Receiver module   can be used for many DIY projects. The  receiving module use LC oscillation circuit .It is easy to use and it take four road decoding output. The remote control has four buttons with corresponding to four data bits to the receiving board output pin.

    • Power: 4.5~7V
    • Quiescent Current (mA): 4.5 mA
    • Modulation: AM (OOK)
    • Operating Temperature: -10°C to +70°C
    • Receiver sensitivity (dBm):-105 DB
    • Transmitting range: upto 100 Meters
    • Transmitting Frequency: 315MHz
    • Operating Mode: Non Locking
    • Channels: 4
    • Dimensions: 4.5 x 2cm
    • Weight: 37g
  • WiFi Point To Point Camera
    -25%

    WiFi Point To Point Camera

    Wi-Fi point to point web camera is among smallest web / spy camera with features of video recording. Wi-Fi wireless network access. IT has tidiest design with intelligent security and simple operation. It supports both Android OS and IOS. You can watch video through phone under no network form point to point feature.

  • 433MHZ TELEMETRY MODULE PAIR FOR PIXHAWK AND APM 1000MW 5KM RANGE
    Out of Stock

    433MHZ TELEMETRY MODULE PAIR FOR PIXHAWK AND APM 1000MW 5KM RANGE

    Features

    • Very small size
    • Light weight (under 4 grams without antenna)
    • 433Mhz frequency band
    • Receiver sensitivity to -140 dBm
    • Transmit power max 30dbm (1000mW @ 9600bps)
    • Transparent serial link
    • Air data rates up to 250kbps
    • Range of approx 1 mile with supplied antennas
    • Demonstrated range of several kilometers with a small omni antenna
    • Can be used with a bi-directional amplifier for even more range
    • MAVLink protocol framing and status reporting
    • Frequency hopping spread spectrum (FHSS)
    • Adaptive time division multiplexing (TDM)
    • Support for LBT and AFA
    • Configurable duty cycle
    • Built in error correcting code (can correct up to 25% data bit errors)
    • Open source firmware
    • AT commands for radio configuration
    • RT commands for remote radio configuration
    • Adaptive flow control when used with APM
    • Based on the HopeRF HM-TRP radio module, featuring an SiLabs Si1000 RF microcontroller.
    • Upgraded to more convince Molex 1.25mm

    Specifications:

    • Band: 433MHz
    • Antenna connectors: RP-SMA connector
    • Output power: 1000mW (30dBm), adjustable between 1-30dBm
    • Sensitivity: -140 dBm sensitivity
    • Interface: Standard TTL UART
    • Connection status: LED indicators

    Package Includes:

    • Radio Telemetry base station (USB Connection)
    • Telemetry Transceiver (Pin Header)
    • lead set x 1
    • Antenna x 2

    *2Km range is only possible when used in proper weather condition, very low air data rate and line of sight Ground-Air. With default settings and full transmit power on both ends the range is around 300-500 meters.

  • Av Transmitter & Receiver 5.8g 40CH
    -20%

    Av Transmitter & Receiver 5.8g 40CH

    FPV 5.8G 600mW A/V Transmitting/Receiving System TS832 + RC832  is used with various kinds of remote control toys like  Rc helicopter , quad copter, airplane and many more as an universal video transmitter and receiver. It is plug and playable with range of more than 5km in an open area. This module has push button and digital display in built for easy channel change. The transmitter is compatible with the old 8 pass receiver and receiver is compatible with the old 8 pass transmitter. It has independent video and audio signal outputs

  • Wireless Charging Module 5V,1A
    -33%

    Wireless Charging Module 5V,1A

    The Wireless Charging Module 5V, 1A is a wireless charging module which is a perfect replacement for wireless power supply with stable 5V output voltage and 1A output current. It is applicable for many electronic types of equipment in common use for wireless charging or power supply. It consists of a transmitter and insulation coil. 

  • Apc 230 Wireless Transceiver Module
    Out of Stock

    Apc 230 Wireless Transceiver Module

    The APC230 Wireless Transceiver Module is self organizing wireless transceiver module. It is highly integrated semi duplex low power wireless data transfer module. It has embedded high speed microprocessor and high performance IC. It also has improved anti-interference and sensitivity for high efficiency forward error correction channel encoding technology. It can be suitable for various applications like: - Wireless transducer, Industrial automation, Remote control and monitoring, the management of cars, Wire replacement, the control of traffic signals, Wireless handheld terminal, automated meter reading and many more. 

  • Apc 220 Wireless Serial Port Module
    Out of Stock

    Apc 220 Wireless Serial Port Module

    The APC220 Wireless Serial Port Module is a Radio Communication Module. It is a simple and economical solution to wireless data communications. It is a highly versatile, low power radio solution that is easy to setup. It also can be integrated into any project requiring a wireless RF link. It is embedded of high speed microprocessor and high performance IC chip. It creates a transparent UART/TTL interface communication. It can be suitable for various applications like: - Wireless sensor, Home automation, Wireless reading clock, Robot control, Car control, Arduino board extended, Robot model and many more.

  • Wireless USB Network NANO Card
    Out of Stock
    -5%

    Wireless USB Network NANO Card

    The Wireless USB Network NANO Card is a 150MBPS Super Mini USB Wifi Adapter Module. EDUP's Wireless-N USB 2.0 Adapter allows you to connect your laptop or desktop to any Wireless-N networks in your home or office. This Module has various features like: - High speed data transfer, Lightning fast download, Online gaming and so on. This Super Mini USB Wifi Adapter also gives you access to all the high-speed features of Wireless-N networks whether on newer or older computers. It is simple and easy to setup so that you can surf the internet, download movies, and e-mail in no time.

  • NRF51822 Wireless Bluetooth Module
    -9%

    NRF51822 Wireless Bluetooth Module

    The NRF51822 Wireless Bluetooth Module is a BLE Version 4.0 Wireless Bluetooth Module based on NRF51822 chipset. It is a multi-protocol, single chip solution for ULP wireless applications. This Module has various features like: - Tiny in size and stable in characteristics, Supports BLE4.0 and 2.4GHz Soc designed for ULP and many more. It can be suitable for various applications like: - Mobile phone accessories, Sports and leisure equipment, Consumers electronics, USB dongles, Healthcare and medical and so on.

  • Dc 12V Battery Undervoltage low voltage cut off automatic switch recovery protection module charging controller
    -8%

    Dc 12V Battery Undervoltage low voltage cut off automatic switch recovery protection module charging controller

    This is a undervoltage switch module used to turn off the power of resistive load in the event of the voltage dropping below a definite value.
    When the voltage rises back, the module will automatically turn on load again.
    The module has a low power consumption of less than 10mA.
    Default undervoltage protection value is about 10.5V, and can be adjusted by turning potentiometer, clockwise to increase and anticlockwise to reduce.
    If the load restores immediately after it is turned off, you can add a capacitor(>25V), and the capacitance depends on your load.