× Success! Product successfully added to cart.
  • PIR Motion Sensor

    PIR Motion Sensor

    PIR sensor is used for motion detection  moving people or animal . It is commonly used for security systems and automation. It has features like Delay time adjustment , Sensitivity adjustment, Repeat Trigger Selection Jumper. This sensor can stay ON while the motion is detected and will switch itself off at every interval set .

  • Sharp Distance Sensor 2y0a02

    Sharp Distance Sensor 2y0a02

    Sharp Distance Sensor  2y0a02 is a distance measuring sensor unit. This sensor is great for sensing objects up to 5 feet away. It can be used for touch-less switch, sensor for energy saving, for detection of human body. It can also find the distance to objects that present a very narrow edge, It has Infrared Proximity Sensor and can measure  the distance form 20 cm to 150 cm .

  • Sharp Distance Sensor 2y0a21

    Sharp Distance Sensor 2y0a21

    The Sharp Distance Sensor 2y0a21 is wide angel distance measuring sensor with accurate measurment used for many DIY projects.  It has an analog output that varies from 3.1V at 10cm to 0.4V at 80cm.  It can be used for touch less switch, DIY robots. It is united with PSD infrared LED and signal processing circuit. The voltage output in this device is corresponding to the detection distance.

  • 5 Way Line Sensor Array

    5 Way Line Sensor Array

    5 channel high sensitivity sensor has a High accuracy for tracking black line.It has high sensitivity which is able to accurately identify the lines of characteristics. They can be operated by any microcontroller or Arduino module as these sensors are digital.They have Infrared detection , touch detection sensor and led indicators. These sensor are built to detect block line with high precision

  • Hall Effect Sensor Module

    Hall Effect Sensor Module

    Hall Effect Sensor are used to detect the presence of magnet and are designed to detect continuous variations in the magnetic fields and convert fields strength to a proportional voltage. The device includes an on-chip Hall voltage generator for magnetic sensing, a comparator that amplifies the Hall voltage this same principle can be used to make a speedometer for a bike or any other vehicle. 

  • IR Reciver Sensor Module

    IR Reciver Sensor Module

    The IR Reciver Sensor Module is widely used in sending  information forn an infrared remote control to another device. It is based on the 38KHz IR Receiver Sensor with a variety of single-chip interface . It can be used on both arduion and MCU platform.

  • Crash Sensor

    Crash Sensor

     A small micro switch crash sensor designed for the Arduino. It is an electric switch that is actuated by very little physical force. Micro switches are very widely used.  They are widely used in  machinery, industrial controls, vehicles, and many other places for control of electrical circuits. It can be directly connected to the IO expansion shield it is mainly used for appliances, machinery industrial controls and vehicle.

  • Infrared Water Proof Sensor

    Infrared Water Proof Sensor

    Infrared Water Proof Sensor is a distance measuring sensor mostly used of detecting level of tank,  transparent object, mirror surface object. It has plastic housing with IP67 protection degree. It is waterproof with 900mm to 1600mm sensing distance.

  • HB 100 Microwave Motion Sensor

    HB 100 Microwave Motion Sensor

    HB 100 Microwave Motion Sensor module Use HB100 Chip with 10.525GHz frequency. It is mostly used in motion detection equipment’s.  It consist of microwave mixer, Dielectric Resonator Oscillator (DRO) and patch antenna. Its application are automatic start of the door car, home burglar alarm and many more.

  • MPU-6050 Module

    MPU-6050 Module

    The MPU -6050  GY 251  module is 3 axis gyroscope and 3 axis accelerometer module for arduino. This module use MPU -6050 chip with built –in 16 bit AD converter and 16 bits of output data. This module can be used for motion based gaming controllers , DIY projects and many more.

  • H206  Speed Measuring Sensor Module

    H206 Speed Measuring Sensor Module

    H206  Speed Measuring Sensor Module is used to  detect the speed of  an object with H206 Fiber glass photo coupler having operating voltage 5v  where speed encoder included used schmitt triggered output for noise immunity.Blocking output is low and non-blocking output is high with operating temperature -20°C - 65°C.

  • Im393 Motor Speed Measuring Sensor Module

    Im393 Motor Speed Measuring Sensor Module

    Im393 motor speed measuring sensor module is Used in motor speed detection, with good signal and waveform with strong  driving ability for more than 15 MA pulse count, the position limit Using imported groove optical coupling sensor, width 5mm.It has the output state light, if output high level, the lights are off. if output low level, it on. The DO output interface can be directly connected to a micro-controller IO port if there is a block detection sensor, such as the speed of the motor encoder can detect. It can be connected to the relay limit switch, and other functions it can also with the active buzzer module compose alarm.