The 1.3 inch OLED (Organic Light –Emitting Diode) LCD display module use SH1106 Driver module. It is a self-light emitting technology with multi layered organic film placed between an anode and cathode. It has high application potential for virtually all types of displays with ultra-low power consumption feature.

The 0.9 inch OLED display use SSD1306 driver chip with 128x64 dot matrix display module. OLED screens has high brightness, self-emission, high contrast ratio, wide temperature range, wide viewing angle, and low power consumption. This OLED can be used for smart watch, MP3, DIY projects and many more.

Specifications

• Resolution: 128 x 64
• Visual Angle: >160°
• Input Voltage: 3.3V ~ 6V
• Compatible I/O Level: 3.3V, 5V
• Mini Size: 2.7 x 2.8cm
• Only Need 2 I/O Port Control
• Full Compatible with Arduino
• Working temperature: -30°C ~ 70°C
• Module volume: 32 x 35.5 x 4mm

Package Includes:

• 1 x 128 x 64 0.96 Inch OLED Display Module I2c Interface - Arduino Compatible

16 * 2 Lcd module is 16 characters wide and 2 row character Lcd module made of high quality   material. It has 16 pin connecter with blue black light. It can be easily controlled by MCU and can be used in any embedded systems, industrial device and hand held equipment’s.

20* 4 LCD module is 20 characters wide and row character LCD module made of high quality   material. It can be controlled with 6 digitals line. It has built in characters set of English / Japanese. It has 16 pins connector. It can be used in different projects. It has connection port of 0.1" pitch.

 The I2c Connector Module Board use PCF8574 I2C chip that helps to converts I2C serial data to parallel data for the LCD display. It is compatible with 16x2 or 20x4 Character Display Module that supports 4 bit mode. It can have 8 modules on a singles i2c bus as well as the backlight can be controlled by the jumper and display contrast is adjustable by the potentiometer on the board.

The 5 Inch HDMI Display is high resolution plug and play LCD mostly used in Raspberry Pi. Instead of I/Os the HDMI interface is used for displaying. The drivers are provided and backlight can be turned off to lower power consumption.  It also has USB interface for touch control.

3.2 inch Resistive Touch Screen LCD is designed for Raspberry Pi Model B/B+.  This 3.2 inch lcd is 3.1 version Lcd. It supports raspbian system and allows to play videos and take photos. It also support software keyboard.

The 2.0 Inch TFT LCD Module is based on ILI9225 LCD driver that support Arduino MCU directly without need of any connections. This module has integrated backlight control circuit so that it can control on/off or PWM dimming. . It is an expansion board with serial SPI interface. It also has integrated SD card expansion circuit.It can be used in many DIY arduino projects.

The 3.5inch TFT LCD Module is based on ILI9481 LCD driver that includes Micro SD slot. This module gives nice picture quality and works well with Arduino Uno and Arduino Mega controllers. This kind of module is not a touch screen display. No soldering, no wiring is needed. 

 The 2.4 Inch LCD Module has 240 by 320 resolution. It has 4 wire resistive touch screen. This module has Spfd5408 controller with built in video RAM buffer. It is mostly used in arduino series. IT has 8 bit digital interface plus 4 control lines.

 The 3.2 Inch TFT LCD display has 480 by 320 display resolution. It can be directly inserted to arduino mega 2560. It includes SPI flash circuit and SD card socket. It is compatible with arduino series development board, also compatible with UTFT / UTFT_buttons / Utouch library for Arduino

 The Graphic Lcd is 12864zw LCD module. It has 6800 8 bit parallel interface. It has 180 by 64 dots display format with viewing area of 72.0 x 40.0 mm. It can be used in different DIY projects, display units in video games and many more.